Large Model Tri-vision : F3V-136

MAIN TECHNICAL PARAMETERS
1. Main material: Special aluminum alloy, environmental protection type with advantages of firm, not easy to cause deformation, durable and not easy to cause oxidation.
2. Outer frame specification: 165mm (width)*160mm(thickness)
3. Width of triangular prism: 136mm, thickness 1.5mm ~2.0mm
4. Weight: about 25kg per square meter
5. Drive: cam propulsion system /Double-gear stepping wheel drive system. The drive is steadier without wobbling; the turning is more compactness without deviation;
6. Drive shaft: solid-core aluminum shaft with diameter of 2cm, the twisting force is strong and the drive is smooth.
7. Picture combination: 8.0 m triangular prism without connection; the length is not limited.
8. Picture gap: confirm according to the height of tri-vision billboard.
9. Picture turning time: 6-15 seconds per picture (preset at factory).
10. Picture displaying time: set freely between 0 second to 900 seconds.
11. Tri-vision power supply: voltage: 220V; current: 0.54A, frequency: 50HZ and power: 90W.
12. Wind resistance capability: within Scale 10.
13. Running life: Qualified installation will ensure normal service life up to 15 years based on 16 hours each day.
14.Flipping performances:
A: Simultaneous type B: Wave type (from left to right or from right to left)
C: Curtain opening type D: Curtain closing type
E: Flipping step-by-step F: Flipping from part to part

PRODUCT CONFIGURATION
1. Motor: Original Japanese Panasonic 90W stepping motor with good heat emission, low vibration, high performance and long service life.
2. Control system: French Schneider with such functions as active protection automatic reset and intelligent control picture displaying time, etc.
APPLICATION RANGE
It is applicable to such large-scale outdoor advertising medium as outside wall advertisement, roof advertisement, ground-advertising wall, overpass advertisement, T-type vertical shaft advertisement, etc.

Medium Model Tri-vision : F3V-131

MAIN TECHNICAL PARAMETERS
1. Main material: special aluminum alloy, environmental protection type with advantages of firm, not easy to cause deformation, durable and not easy to cause oxidation.
2. Outer frame specification: 145mm(width)*160mm(thickness)
3. Width of triangular prism: 131mm, thickness 1.35mm��2.0mm
4. Weight in working order: about 20kg per square meter
5. Drive: cam propulsion system. The drive is steadier without wobbling; the turning is more compactness without deviation;
6. Drive shaft: solid-core aluminum shaft with diameter of 2 centimeter, the twisting force is strong and the drive is smooth;
7. Picture composition: 7.0 m triangular prism without connection; the length is not limited.
8. Picture gap: confirm according to the height of tri-vision billboard.
9. Picture turning time: 6-15 seconds per picture (it has set before leaving factory).
10. Picture staying time: set freely between 0 second to 900 seconds.
11. Tri-vision power supply: voltage: 220V; current: 0.54A, frequency: 50HZ and power: 90W.
12. Wind resistance capability: within Scale 10.
13. Running life: if the installation is qualified, calculating 16 hours per day, the normal life is 15 years.
14.Flipping performances:
A: Simultaneous type B: Wave type (from left to right or from right to left)
C: Curtain opening type D: Curtain closing type
E: Flipping step-by-step F: Flipping from part to part
PRODUCT CONFIGURATION
1. Motor: Japanese Panasonic 90W stepping motor with good heat emission, low vibration, high performance and long service life.
2. Control system: French Schneider with such functions as active protection automatic reset and intelligent control picture staying time, etc.
APPLICATION RANGE
It is applicable to such large-scale outdoor advertising medium as T-type vertical shaft, roof advertisement, wall advertisement, overpass advertisement, etc.

Why use Trivision?

Dynamic display (due to constant movement) .
Multiple exploitation of the same advertising space.
Display of three products instead of one .
Time-honored manufacture.

How to cooperate with Us

As an industry leader, Adhaiwell provides full project management services. In this section we will document and demonstrate the entire sign manufacturing process-from conception to completion. All this from in-house resources.

Haiwell Advertising Industrial Co., Limited (ADHaiWell.com) is the leading manufacturer of OEM and customize indoor and outdoor advertising media solution products. Specialists in the manufacturing advertising equipment services. We provide products made of the highest quality materials, offering an outstanding value for our customers worldwide.  

Our main business area is to provide solutions tailored to different customer requirements in the manufacture and installation of all types of indoor and outdoor advertising media. As specialists in the service of manufacturing, installation and maintenance of advertising we care always innovating.  

Our main advertising activities: